Re: APRS School and Set Up Meeting
Posted: Thu Sep 17, 2009 8:04 am
I wouldn't necessarily call it successful, but I did get it to work.
James you will need to configure the Kenwood tnc to work throuugh the AGW packet engine. Then connect agwtracker to the packet engine.
The way I did it was to configure a sound card interface into the Kenwood external data port. I then used that for monitoring and let the on-board APRS functionalty work on the kenwood.
I think I documented that setup in another thread. I will need to check that out and I will add that link later.
This I hope should give you some direction.
James you will need to configure the Kenwood tnc to work throuugh the AGW packet engine. Then connect agwtracker to the packet engine.
The way I did it was to configure a sound card interface into the Kenwood external data port. I then used that for monitoring and let the on-board APRS functionalty work on the kenwood.
I think I documented that setup in another thread. I will need to check that out and I will add that link later.
This I hope should give you some direction.