Page 1 of 1
Question for the Engel MT60/80 folks... (fridge slide)
Posted: Fri Sep 04, 2009 3:10 pm
by Chazz Layne
How much total height does the
Engel fridge slide add to the fridge? Specifically, the one on the left that the fridge sits down inside... looks to be about half an inch but I haven't been able to confirm that.
I want an Engel MT60 Combi, but I am vertically challenged to about 18.625 inches...
Re: Question for the Engel MT60/80 folks... (fridge slide)
Posted: Fri Sep 04, 2009 3:43 pm
by DaveK
Chazz:
You may want to check with Hawkeye, here on this forum. He may be able to build you a low profile slide out tray that will meet your requirements. Good luck.
Re: Question for the Engel MT60/80 folks... (fridge slide)
Posted: Fri Sep 04, 2009 7:02 pm
by sdnative
DaveK wrote:You may want to check with Hawkeye
He's busy right now dodging fires. He was evacuated from his home in Yucaipa
Re: Question for the Engel MT60/80 folks... (fridge slide)
Posted: Sat Sep 05, 2009 3:14 pm
by Chazz Layne
Doh, I hope he and his house come out unscathed. I remember the Laguna fires in the 90s... not fun.
Re: Question for the Engel MT60/80 folks... (fridge slide)
Posted: Wed Aug 25, 2010 7:22 am
by FriZer
Chazz is your problem is solve? I am really curious what you did in that case. I really cannot control myself asking when I got so curious. So what happen in your problem Chazz?
Re: Question for the Engel MT60/80 folks... (fridge slide)
Posted: Wed Aug 25, 2010 9:35 am
by Chazz Layne
I ended up with a change in plans... I wanted more storage space as well, so I'm building around the smaller MT35 freezer/fridge. The MT35 will have no trouble at all fitting in that space, fridge slide included.
