ICOM IC-R3 Communications / NTSC video Receiver LIKE NEW !!!
Posted: Sun Sep 07, 2008 11:11 pm
I have an ICON IC-R3 Communications receiver, that has a built-in 2" hi-res video screen. The IC-R3 is a wide-band receiver, including current TV bands and some closed circuit video systems. With optional (not included) wireless cameras, it will allow you to monitor live feed as well.
This unit has less than 1 hour total time on it, and includes the car charger, and the AA battery adapter, which I purchased separately.
Unit comes with flex antenna, charger, and soft case.
Retail for the ICOM IC-R3 with accessories is $599.
This absolutely spotless unit is available for $300 with all the above listed accessories included.
If interested, PM me or call me @ Dirty Parts, Inc., 310-390-9086 M-F 10a-7p PDT
GENERAL SPECS FOR THE ICOM IC-R3:
Frequency Range: 0.495-815.995 MHz, 902-2450.095 MHz
Mode: FM, AM, WFM, AM-TV, FM-TV
AM TV one of either NTSC M, PAL B or PAL G systems
FM TV for 900-1300 MHz, 2250-2450 MHz ranges only; not available in some versions
Frequency resolution: 5 kHz, 6.25 KHz
Number of memory channels: 450 (8 banks of 50 channels plus 50 scan edges)
Antenna connector: BNC (50 ohms)
Operating temperature range: -10°C to +60°C ; +14 F to +140 F
Frequency stability: ±6 ppm max.( -10°C to +50°C)
Power supply requirement: 3.6-6.3 V DC (negative ground)
Current drain (at 4.5 V DC):
At rated output: 210 mA typical (backlight off)
At stand-by: 140 mA typical
Power save: 53 mA typical
TV reception: 730 mA typical (color LCD on)
Dimensions: 61 (W) x 120 (H) x 32.9 (D) mm; 2 13/32 (W) x 4 23/32 (H) x 1 9/32 (d) in.
Weight: 300 g; 10.6 oz
* Cellular telephone frequencies blocked in the US.
Receiver
Receiver system: Triple-conversion superheterodyne
Quadruple-conversion for above 1150 MHz
Sensitivity (typical):
AM (at 10 dB S/N)
0.495-4.995 MHz: 1.4 µV
5.0-29.995 MHz: 1.0 µV
118-136 MHz: 0.79 µV
222-329.995 MHz: 1.0 µV
FM (at 12 dB SINAD)
1.625-4.995 MHz: 0.32 µV
5.0-469.995 MHz: 0.25 µV
470-799.995 MHz: 0.45 µV
800-1999.995 MHz: 0.56 µV
2000-2299.995 MHz: 1.0 µV
2300-2450.095 MHz: 1.8 µV
WFM (at 12 dB SINAD)
76-107.995 MHz: 1.0 µV
175-221.995 MHz: 1.0 µV
470-769.995 MHz: 1.8 µV
Selectivity:
FM, AM: More than 12 kHz/-6 dB
Less than 30 kHz/-50 dB
WFM: More than 150 kHz/-6 dB
Audio output power (at 4.5 V DC): 100 mW typical at 10% distortion with an 8 ohm load
External SP connection: 3-conductor 3.5 (D) mm (1/8")/8 ohm
Video/Audio OUT connector: 3-conductor 3.5 (D) mm(1/8")/8 ohm
This unit has less than 1 hour total time on it, and includes the car charger, and the AA battery adapter, which I purchased separately.
Unit comes with flex antenna, charger, and soft case.
Retail for the ICOM IC-R3 with accessories is $599.
This absolutely spotless unit is available for $300 with all the above listed accessories included.
If interested, PM me or call me @ Dirty Parts, Inc., 310-390-9086 M-F 10a-7p PDT
GENERAL SPECS FOR THE ICOM IC-R3:
Frequency Range: 0.495-815.995 MHz, 902-2450.095 MHz
Mode: FM, AM, WFM, AM-TV, FM-TV
AM TV one of either NTSC M, PAL B or PAL G systems
FM TV for 900-1300 MHz, 2250-2450 MHz ranges only; not available in some versions
Frequency resolution: 5 kHz, 6.25 KHz
Number of memory channels: 450 (8 banks of 50 channels plus 50 scan edges)
Antenna connector: BNC (50 ohms)
Operating temperature range: -10°C to +60°C ; +14 F to +140 F
Frequency stability: ±6 ppm max.( -10°C to +50°C)
Power supply requirement: 3.6-6.3 V DC (negative ground)
Current drain (at 4.5 V DC):
At rated output: 210 mA typical (backlight off)
At stand-by: 140 mA typical
Power save: 53 mA typical
TV reception: 730 mA typical (color LCD on)
Dimensions: 61 (W) x 120 (H) x 32.9 (D) mm; 2 13/32 (W) x 4 23/32 (H) x 1 9/32 (d) in.
Weight: 300 g; 10.6 oz
* Cellular telephone frequencies blocked in the US.
Receiver
Receiver system: Triple-conversion superheterodyne
Quadruple-conversion for above 1150 MHz
Sensitivity (typical):
AM (at 10 dB S/N)
0.495-4.995 MHz: 1.4 µV
5.0-29.995 MHz: 1.0 µV
118-136 MHz: 0.79 µV
222-329.995 MHz: 1.0 µV
FM (at 12 dB SINAD)
1.625-4.995 MHz: 0.32 µV
5.0-469.995 MHz: 0.25 µV
470-799.995 MHz: 0.45 µV
800-1999.995 MHz: 0.56 µV
2000-2299.995 MHz: 1.0 µV
2300-2450.095 MHz: 1.8 µV
WFM (at 12 dB SINAD)
76-107.995 MHz: 1.0 µV
175-221.995 MHz: 1.0 µV
470-769.995 MHz: 1.8 µV
Selectivity:
FM, AM: More than 12 kHz/-6 dB
Less than 30 kHz/-50 dB
WFM: More than 150 kHz/-6 dB
Audio output power (at 4.5 V DC): 100 mW typical at 10% distortion with an 8 ohm load
External SP connection: 3-conductor 3.5 (D) mm (1/8")/8 ohm
Video/Audio OUT connector: 3-conductor 3.5 (D) mm(1/8")/8 ohm