Question for the Engel MT60/80 folks... (fridge slide)

Chazz Layne · Post by **Chazz Layne** » Fri Sep 04, 2009 3:10 pm

How much total height does the Engel fridge slide add to the fridge? Specifically, the one on the left that the fridge sits down inside... looks to be about half an inch but I haven't been able to confirm that.

I want an Engel MT60 Combi, but I am vertically challenged to about 18.625 inches...

DaveK · Post by **DaveK** » Fri Sep 04, 2009 3:43 pm

Chazz:

You may want to check with Hawkeye, here on this forum. He may be able to build you a low profile slide out tray that will meet your requirements. Good luck.

sdnative · Post by **sdnative** » Fri Sep 04, 2009 7:02 pm

DaveK wrote:You may want to check with Hawkeye

He's busy right now dodging fires. He was evacuated from his home in Yucaipa

Chazz Layne · Post by **Chazz Layne** » Sat Sep 05, 2009 3:14 pm

Doh, I hope he and his house come out unscathed. I remember the Laguna fires in the 90s... not fun.

FriZer · Post by **FriZer** » Wed Aug 25, 2010 7:22 am

Chazz is your problem is solve? I am really curious what you did in that case. I really cannot control myself asking when I got so curious. So what happen in your problem Chazz?

Chazz Layne · Post by **Chazz Layne** » Wed Aug 25, 2010 9:35 am

I ended up with a change in plans... I wanted more storage space as well, so I'm building around the smaller MT35 freezer/fridge. The MT35 will have no trouble at all fitting in that space, fridge slide included.

Outdoor Adventure USA

Question for the Engel MT60/80 folks... (fridge slide)

Question for the Engel MT60/80 folks... (fridge slide)

Re: Question for the Engel MT60/80 folks... (fridge slide)

Re: Question for the Engel MT60/80 folks... (fridge slide)

Re: Question for the Engel MT60/80 folks... (fridge slide)

Re: Question for the Engel MT60/80 folks... (fridge slide)

Re: Question for the Engel MT60/80 folks... (fridge slide)

Who is online