AGWTracker and GPSgate

[NotAMog]

Has anyone had any success running AGWTracker with GPSgate? It appears that AGWTracker is not detecting the GPSgate virtual comm port for the GPS unit. My new carputer (Pinzputer?) only has one hardware serial port which I have connected to my Kenwood TM-D700A. I had to use the hardware serial port to get UI-View to talk to the radio. I think UI-View is working correctly but I'd like to try out AGWTracker. I've noticed that quite a few ham applications don't like virtual serial ports.

[cruiserlarry]

I've been running GpsGate for a while, and usually use UI-View 32 with it with no problem. Although I do have AGW Tracker loaded on my computer, I've never used it (waiting for a personal tutorial from DaveK ).

It appears, based on the GPS setup in AGW, that you can choose from any of the many additional com ports you can assign through GpsGate. So, it should work...

[NotAMog]

There is a pulldown for the Comm ports but it only lists the hardware Comm port. The directions say that if the desired Comm port is not shown to just type it in, which I tried but the software doesn't seem to recognize the GPSgate virtual port. I may have to live with UI-view if I can't get AGWtracker to work. There are a few other APRS applications out there I've used in the past I may try out as well.

[DaveK]

I have been running AGW and GPS Gate from the beginning, without incident. I have noticed that I need to use the available virtual ports in order. What equipment are you using?