'01 Sierra Expedition's White DC Tacoma

[FlyingWil]

OK, here's some picture of the NL installed and the new shoes!

I mounted the National Luna Intelligent Solenoid - Dual Battery Isolator in the same spot that the surepower unit was located on the fire wall to the drivers side of the brakes. Now I just have to figure out where to mount the controller in the cab.... hmmmm???



OH and the new wheels and shoes...





Ummm, yeah, the chrome is going away... yuck :smilies27 need to wait for parts to get in.








All the chrome soon left!!!

[FlyingWil]

I installed the remote head for the Yeasu FT-7800 in the headliner.

Here you can see the speaker and face plate install all glued down:







Then all taped up in case the glue gives...


Radio unit is mounted on the back wall of the cab so that I can easily access the data port with out folding the seat down. It is also on a slight angle to allow for easier access to the data port.
Radio remote mount:


Aux Speaker and head unit:


Unit on (view from driver's seat):


Mic install... using a 6 pin wire and connector hidden behind the scangauge.




Mic is mounted in the "blank" where the airbag selector would be on non-dub cab models.


Antenna: