2008-12-06 Jacumba - Table Mtn / Elliot Mine
2008-12-06 Jacumba - Table Mtn / Elliot Mine
Wow, what a fun day. It was good to see Steve and Ralphie again, and to meet Dana.
Last edited by sdnative on Thu Oct 25, 2012 11:56 am, edited 1 time in total.
Re: 2008-12-06 Jacumba - Table Mtn / Elliot Mine
Looks like you had a great day. With I had been out there with you rather than working. I haven't seen any of those areas yet. 

"OLLIE"
(K6JYB)
APRS
K6JYB ("BugEater")
K6JYB-7 (VX-8R)
http://www.facebook.com/FJOllie
"Some people live an entire lifetime and wonder if they have ever made a difference in the world, the Marines don't have that problem."
-Ronald Reagan
CHECK OUT THE OUTDOOR ADVENTURE USA AMATEUR RADIO NET:
Every Thursday night at 7:30pm PST
Repeater
146.385+ PL: 146.2 Keller Peak (Echolink Equipped)
(K6JYB)
APRS
K6JYB ("BugEater")
K6JYB-7 (VX-8R)
http://www.facebook.com/FJOllie
"Some people live an entire lifetime and wonder if they have ever made a difference in the world, the Marines don't have that problem."
-Ronald Reagan
CHECK OUT THE OUTDOOR ADVENTURE USA AMATEUR RADIO NET:
Every Thursday night at 7:30pm PST
Repeater
146.385+ PL: 146.2 Keller Peak (Echolink Equipped)
Re: 2008-12-06 Jacumba - Table Mtn / Elliot Mine
Oh maaaan, wish I could have gone with you guys, but it was my GF's mother's b-day today and we went out to Claim Jumper in Temecula to celebrate. Looks like you guys ran across some way cool stuff out there! Oh well, next time!
-Craig
N6CJW
'07 FJ Voodoo Blue MT6 CQ UR GY
Mods: 3" OME coilover lift, Trail-Gear sliders, All Pro Skids, Bandi Mount,
Midland 75-822 CB, Yaesu FT-8800R, Lowrance XOG, K&N Air Filter, Baja Rack & Ladder, BFG 285/70R17 AT KO
"Show me a 4X4 that's never seen dirt and I'll show you a poser"
N6CJW
'07 FJ Voodoo Blue MT6 CQ UR GY
Mods: 3" OME coilover lift, Trail-Gear sliders, All Pro Skids, Bandi Mount,
Midland 75-822 CB, Yaesu FT-8800R, Lowrance XOG, K&N Air Filter, Baja Rack & Ladder, BFG 285/70R17 AT KO
"Show me a 4X4 that's never seen dirt and I'll show you a poser"
- BorregoWrangler
- Posts: 1920
- Joined: Wed May 07, 2008 6:53 pm
- Location: San Diego, CA (El Cajon)
- Contact:
Re: 2008-12-06 Jacumba - Table Mtn / Elliot Mine
Oh, I love that part! Glad to see someone was out enjoying the day. I've been busy taking care of issues with our old place. Great pics. I'm looking forward to getting out again soon.sdnative wrote:I had never been down to the spring, and let me tell you that section is hairy. Very narrow roads with a steep embankment, lots of boulders and very off camber. A couple of times I thought I was going over.
Re: 2008-12-06 Jacumba - Table Mtn / Elliot Mine
I had a great time yesterday. It was nice to do a little wheeling with Eric and Ralphie again. It was also nice to meet Dana and hope to see him on the trail. The little side trips we took we quite challenging. As mentioned, some spots were quite narrow and off-camber enough to be a little unnerving. Not for the faint-hearted, for sure.
The only problem on the trail was a banjo bolt that came loose on one of my front calipers. After spewing brake fluid all over and losing my brakes, the problem was quickly resolved.
Steve
The only problem on the trail was a banjo bolt that came loose on one of my front calipers. After spewing brake fluid all over and losing my brakes, the problem was quickly resolved.
Steve
- Attachments
-
- P1010760.JPG (470.54 KiB) Viewed 3164 times
Steve
The little Liberty that could - most of the time
KJ4STV, formerly KI6OQC
The little Liberty that could - most of the time
KJ4STV, formerly KI6OQC
Re: 2008-12-06 Jacumba - Table Mtn / Elliot Mine
BorregoWrangler wrote:Oh, I love that part! Glad to see someone was out enjoying the day. I've been busy taking care of issues with our old place. Great pics. I'm looking forward to getting out again soon.sdnative wrote:I had never been down to the spring, and let me tell you that section is hairy. Very narrow roads with a steep embankment, lots of boulders and very off camber. A couple of times I thought I was going over.
Which way did you go? There are two ways down there, they form a loop. We went down from the south side and came back up the north. The south is much more narrow and tippy than the north. Is that where you and Steve went a couple month ago?
There was one spot on the south side where you have to drive up the side to go around a boulder. You are leaning about 30 degrees and barely clear the boulder by an inch or so.
On the north side there is a spot where a boulder blocks half the road. You have to come dangerously close to the edge to get around it.
Those two sections gave me more pucker than I have had in a while. Wish we took some pics.
- BorregoWrangler
- Posts: 1920
- Joined: Wed May 07, 2008 6:53 pm
- Location: San Diego, CA (El Cajon)
- Contact:
Re: 2008-12-06 Jacumba - Table Mtn / Elliot Mine
sdnative wrote:BorregoWrangler wrote:Oh, I love that part! Glad to see someone was out enjoying the day. I've been busy taking care of issues with our old place. Great pics. I'm looking forward to getting out again soon.sdnative wrote:I had never been down to the spring, and let me tell you that section is hairy. Very narrow roads with a steep embankment, lots of boulders and very off camber. A couple of times I thought I was going over.
Which way did you go? There are two ways down there, they form a loop. We went down from the south side and came back up the north. The south is much more narrow and tippy than the north. Is that where you and Steve went a couple month ago?
There was one spot on the south side where you have to drive up the side to go around a boulder. You are leaning about 30 degrees and barely clear the boulder by an inch or so.
On the north side there is a spot where a boulder blocks half the road. You have to come dangerously close to the edge to get around it.
Those two sections gave me more pucker than I have had in a while. Wish we took some pics.
Yep, that's the same trail Steve (Thatsalexus?) and I did. His stock 4runner was having a heck of time on those narrow, tippy spots. Are you gonna be able to make it out with Ollie on the 20th? If you think that trail gave you some pucker, there's a really gnarley one up on a hill just at the mouth of Fish Creek. I'm just glad my Jeep is narrower that an FJ, otherwise I'm not sure I'd try it.


Re: 2008-12-06 Jacumba - Table Mtn / Elliot Mine
I got plenty of yah yah's out on that trip. Thanks again to Eric, Steve and Ralphie.
Snowby4
Snowby4
- Attachments
-
- smugglers cave
- 000_0289.jpg (728.23 KiB) Viewed 3132 times
If you don't know where your going, any road will get you there.
Re: 2008-12-06 Jacumba - Table Mtn / Elliot Mine
Overlook
- Attachments
-
- overlook
- 100_7163.jpg (852.21 KiB) Viewed 3132 times
If you don't know where your going, any road will get you there.
Re: 2008-12-06 Jacumba - Table Mtn / Elliot Mine
The Wall
- Attachments
-
- The Wall
- 100_7173.jpg (1017.75 KiB) Viewed 3130 times
If you don't know where your going, any road will get you there.
Who is online
Users browsing this forum: No registered users and 2 guests