OAUSA Net - December 4, 2014 - Fire Extinguishers

[DaveK]

Fire extinguishers are one of those things that get little attention, are often neglected, and rarely used. Once the need arises however, the fire extinguisher quickly becomes one of the most important pieces of equipment that we carry. The Net will focus mostly on fire extinguishers that can be carried in a vehicle, but the information that we discuss can also apply to others uses, such as home and office.

I will be posting pictures and links to various sources for product information, fire suppression techniques, and suggested mounting options. Check back again in the next few days for updates. Also, remember that you can do an advance check-in for the net by posting here.

Links

1. H3R primarily sells Halon and Halotron extinguishers which can be found here: http://www.h3raviation.com/products.htm

2. H3R has a very informative section on Halon, here: http://www.h3raviation.com/support_faq.htm

3. Amerex is one of the most well known and largest manufacturers of Fire extinguishers. They offer a full range of fire extinguishers that can be found here: http://www.h3raviation.com/products.htm

4. Fire extinguishing agent comparison chart using similar size fire extinguishers:

Fire Extinguishing Agent Comparison.pdf

(19.96 KiB) Downloaded 107 times

5. Basics on how to use a Fire Extinguisher (using the PASS system): http://www.fire-extinguisher101.com/using.html


PRODUCT SPOTLIGHT

H3R makes a heavy duty fire extinguisher mount for rough environments (rough trails) which offers not only strength, but quick deployment.
See: http://www.h3raviation.com/extreme_duty_nb300.htm

Here is what H3R says about the mount:

Speed is critical when deploying a fire extinguisher. Count on our new Extreme Duty quick release fire extinguisher brackets to allow fast action while withstanding rigorous use. Ideal for aviation, terrestrial and marine applications.

Tough, Functional & Lightweight

Fire extinguisher quickly releases from bracket
Fiberglass reinforced nylon construction and corrosion resistant hardware
Designed to meet MIL SPEC 810G (test in progress)
Tested to withstand inertial loads in excess of 27G in all directions
Fire extinguisher cannot be accidently disengaged from bracket
Fits H3R Aviation fire extinguishers with 3" diameter cylinders (C352TS/C, C354TS & B385TS/C)
"Pull to Release" flag enhances visibility
Does not obscure fire extinguisher nameplate
Weighs a scant 14 oz!

HD Fire Extinguisher Mount.jpg (57.41 KiB) Viewed 1325 times

[afmikec]

Please check me in; will be on either fone or echolink.

Thanks
K7MJC mike

[KK6GFF]

Please check me in too: Roger KK6GFF, West LA.

[KK6DYO]

Please check me in. Thanks.

[Nix]

K6NIX checking in.

[cruiserlarry]

In case I can't get through the repeater link - please check me in W6LPB