Ollie's "BugEater" Build

OLLIE · Post by **OLLIE** » Fri May 01, 2009 2:34 pm

The BugEater has gone through some changes inside and outside. I have a few more things to take care of then I'll completely update its build thread. My avatar has been updated but it is kind of small.

cruiserlarry · Post by **cruiserlarry** » Fri May 01, 2009 3:02 pm

Looking forward to seeing the updated "Bug Eater" pics...

your rig is looking pretty darn awesome (except for that silly Kenwood TM-710

)

gon2srf · Post by **gon2srf** » Fri May 01, 2009 4:50 pm

Looking sweet Ollie!

OLLIE · Post by **OLLIE** » Fri May 01, 2009 8:30 pm

cruiserlarry wrote:Looking forward to seeing the updated "Bug Eater" pics...

your rig is looking pretty darn awesome (except for that silly Kenwood TM-710 )

You forgot about the fridge...

cruiserlarry · Post by **cruiserlarry** » Fri May 01, 2009 9:43 pm

OLLIE wrote:
cruiserlarry wrote:Looking forward to seeing the updated "Bug Eater" pics...

your rig is looking pretty darn awesome (except for that silly Kenwood TM-710 )
You forgot about the fridge...

Ugggggggh......

OLLIE · Post by **OLLIE** » Sat May 02, 2009 12:09 am

BTW Larry... It fits nicely in the back. I'm building the box now.

cruiserlarry · Post by **cruiserlarry** » Sat May 02, 2009 1:05 am

OLLIE wrote:BTW Larry... It fits nicely in the back. I'm building the box now.

Thanks for the update....remind me to take you off my Christmas list

OLLIE · Post by **OLLIE** » Tue May 05, 2009 12:18 am

I was stowing my new ARB Freezer Fridge in my back seat because I had no room for it in the cargo area. I finally dirched the huge Contico box I had in the cargo area and created a home for the fridge back there. Tonight I fabricated a new cargo box for the open space so I had a place to stow my gear. One of the prblems with cargo boxes is access. If it is a top loader you have take everything off the top to get inside. If it is a side loader it can be a pain to stash everything in the box and utilize all the space. So I made a combination of the two. I'm going to road test it for a few days and see how it works out. If all goes well I'll paint it and show the final item when I revamp my build thread. I'm still waiting on a few goodies before I can complete that. Here are some pics of the raw box. It is made out of 3/4" plywood and stainless steel.

: Cargo Box and Fridge; DSC_0516.JPG (1.4 MiB) Viewed 3185 times

: Top hatch slides completely off.; DSC_0518.JPG (1.49 MiB) Viewed 3185 times

: Front hatch.; DSC_0520.JPG (1.48 MiB) Viewed 3185 times

: Loaded and ready to go.; DSC_0521.JPG (1.48 MiB) Viewed 3185 times

raYGunn · Post by **raYGunn** » Tue May 05, 2009 1:00 am

Nice work, a custom box is really called for with all that other stuff back there. I knew that fridge was big but it looks bigger than the old ones. Maybe just because the back is so full.

OLLIE · Post by **OLLIE** » Tue May 05, 2009 8:27 am

raYGunn wrote:Nice work, a custom box is really called for with all that other stuff back there. I knew that fridge was big but it looks bigger than the old ones. Maybe just because the back is so full.

The fridges are about the same size. Only marginal differences. ARB really thought this new fridge out when designing it.

External Dimensions Capacity
Original (42 qrt)
20” x 25” x 14 1/8”

New (50 qrt)
20” x 28” x 15”

Outdoor Adventure USA

Ollie's "BugEater" Build

Re: Ollie's "BugEater" Build

Re: Ollie's "BugEater" Build

Re: Ollie's "BugEater" Build

Re: Ollie's "BugEater" Build

Re: Ollie's "BugEater" Build

Re: Ollie's "BugEater" Build

Re: Ollie's "BugEater" Build

Re: Ollie's "BugEater" Build

Re: Ollie's "BugEater" Build

Re: Ollie's "BugEater" Build

Who is online